Structural Marine a Perth based company is a leading provider of steel fabrication services to the Marine, Mining and Offshore Oilfield industries.
We build a wide range of equipment for heavy industry, including tug boats, rotating mining machinery, mining trommels, chutes, hoppers and pressure vessels, and have a solid international reputation for quality workmanship and innovation.
Our standards are world-class, with a particular emphasis on efficiency, reliability and safety.
We deliver engineering solutions and consistently superior steel fabrication.
We work closely with our clients on each phase of your project, ensuring we meet our clients’ budget and time-frame requirements.
We welcome you to contact us for further enquiries into our services.
Structural Marine was initially formed in 1980 to service the then buoyant marine industry but quickly diversified into heavy plate-work fabrication for the mining and offshore industries as well as continuing to build a reputation as one of Australia’s best and longest established commercial boat builders.
The company has an enviable record for quality workmanship and ontime deliveries to suit our clients requirements.
The name Structural Marine often imparts a false belief that our expertise lies solely in the marine boatbuilding area, this is not correct as a large proportion of our production experience is in the mining and offshore oil industry which can be attested to by the range of jobs successfully undertaken for clients such as Hamersley Iron, Iluka, Coflexip, Woodside and BHP Petroleum to name a few.
Our staff are specialists in their field and will go out of their way to fulfil the clients requirements.
We are strategically located on a high wide road transport corridor just a few kilometres from the Australian Marine Complex facility which can accommodate heavy lift ships for loadout and delivery of large components and modules.
MMAW, GMAW, FCAW, CDT, TIG, SAW, STT
2 x 20 tonne OHETC with 9 metres under the hook
2 x 15 tonne capacity gantry cranes with 15 metres under hook
2 x 10 tonne OHETC with 9 metres under the hook.
1 x 5 tonne OHETC with 9 metres under the hook.
1 x 8 tonne BHB Crane.
1 x 5 tonne MRC Overhead Crane
Welding rotators ranging from 15 to 100 tonne capacity
Welding Manipulators and Turntables
Up to 15 tonne capacity
2 Plate Rollers
Plate rolling equipment up to 25mm x 3000 wide
Punch and Shear
100 x 100 x 10 Angle Iron capacity
28 x 12 Plate Punch Capacity
Radial arm and pedestal drills
Horizontal and vertical saws up to 450mm diameter and 750 throat depth.
Pressing capacity up to 500 tonnes
Hydraulic Press Brake
750 tonne pressbrake 4900 x 16mm capacity
Portable jacking equipment up to 1500 tonne capacity
Plate Edge Preparation Machines
1 x Pullmax Plate Edge Bevelling Machine
1 x Portable Plate Edge Bevelling Machine
Our workshop site covers over 20,000 sq metres and has comprehensive cranage and fabrication/welding facilities suitable for any type of heavy engineering fabrication.
Areas of expertise in the marine industry include:
Areas of expertise in mining and general fabrication include:
AS/NZS 5131 Structural Steelwork CC1
KSN Engineering a subsidiary company of Structural Marine Engineering specializes in the provision of human resources services, welding consultancy services and equipment supply to the Australian mining, construction, engineering and manufacturing industry sectors.
KSN recognizes the importance of highly skilled and responsible personnel in modern day business especially in engineering and metal industries. KSN has developed a team of dedicated, highly qualified personnel producing exceptional results for clients across Australia.
BHP – Goodline Chutes
October 01, 2020
BHP – Goodline Chutes
Full steam ahead
Mayfield switchroom loadout
August 24, 2020
Complete Switchroom manufactured by Structural Marine and Mayfield Industries.
Fabrication of the new Perth Hay Street bridge section
August 12, 2020
Bocol and MACAJV project
Hay St , Perth Bridge fabrication works
Structural Marine and Mayfield Industries Switchroom’s
July 27, 2020
Switch room fabrications
FMG/Goodline Completion of 2x 18 and 24metre truss load out
May 21, 2020
Final Load out of truss project for FMG and Goodline.
Last of the set, 18m and 24m Trusses
FMG/Goodline 2x 36metre truss load out
May 19, 2020
Completion and load out of 2off 36m trusses for FMG Goodline
FMG/Goodline 2x 24metre truss load out
April 23, 2020
Completion and load out of 2off 24m trusses for FMG Goodline
FMG/Goodline 2x 18 metre Truss load out
April 21, 2020
Completion and load out of 2off 18m trusses for FMG Goodline
FMG/Goodline 32 metre and 18 metre Truss load out
April 14, 2020
24 hour shifts to complete 32metre and 18metre over the Easter Holidays
Completed and escorted out of Structural Marine
FMG/Goodline First load out 24Metre Truss
April 06, 2020
First load out of Trusses for Goodline FMG Project
Sam Na Managing Director
Sam Na has over 20 years’ experience of Human Resources Management
within the mining and heavy fabrication industry. Also being a Boilermaker/
1st class welder expert for over 30 years, Sam has a wide range of knowledge and experience in the welding and the fabrication field. During his time in SME he has provided guidance to teams of up to 200 even in the face of challenging and volatile economies. Key qualities include strategizing operational frameworks to integrate and align with company vision and senior management objectives, achieving best practices and maximizing profits.
Harry Na General Manager
Harry Na joined Structural Marine in 2011 with a degree in Human Resource
Management and Logistics Supply Chain Management. Harry is Pro-active in
problem resolution through expert analysis and leadership. Also recognized
for ability to effectively communicate and negotiate with executive
leadership, clients, vendors, contractor’s staff and the public.
John O’Brien Estimator
A qualified Boilermaker/Welder with over 30 year experiences much in the
North West. John has worked with programmers in the robotics’ field
before becoming a workshop supervisor at SME dealing mostly with
Northwest clients. John has an outstanding track record in securing major
marine works and directing projects to successful completion safely and on
time, within budget to the highest standard of quality.
Ali Khizer Project Engineer – Docu Controller
Ali Khizer an Engineer has joined Structural Marine Engineering in 2019 after being apart of several multi-million dollar projects within Western Australia. Project includes but not limited to truss fabrication, conveyor, chutes and hopper fabrications. Ali is also exceptional at providing services in the area of operations documentation management including implementation of automated documents for systems generation with an eye to future updates and modifications.
Jack Zhang Workshop Foreman
Jack has over 27 year experience in the heavy fabrication industry.
Specializing in heavy metals fabrication, civil engineering, mining and offshore fabrication.
Also has been involved in managing and supervising many of the major projects up North.
George Carrs Welding Supervisor
As a qualified 1st class Welder who began with Structural Marine in 1982, George has over 40 year experience of heavy fabrication industry. George manages all weld procedures at Structural marine as well as quality management. George’s skills in the training of apprentices and on-hand knowledge are a valuable asset to the company.
For any inquiries, questions or commendations, please call: 08 9410 2055 or submit message below.
850 Cockburn Road, Henderson WA 6166
PO BOX 199, Hamilton Hill WA 6963
P +61 8 9410 2055
F +61 8 9410 1761